California · Health and Safety Code - HSC
HSC §111085: Polycarbonate resins manufactured after January 1, 1988, and intended for use in fabricating containers for water products defined in this article shall not contain in excess of three parts per millio
Read the full statutory text
Polycarbonate resins manufactured after January 1, 1988, and intended for use in fabricating containers for water products defined in this article shall not contain in excess of three parts per million residual methylene chloride or in excess of 200 parts per million residual monochlorobenzene unless the department establishes a lower level by regulation. For the purpose of monitoring compliance with this section, the concentration of methylene chloride and monochlorobenzene shall not exceed one part per billion in water. “Polycarbonate resins” means the substances defined by Section 177.1580 of Title 21 of the Code of Federal Regulations except as modified by this section.
Verify at the official source: California legislative text
Facing this? Know exactly what happens next.
MOFRD turns this code section into your situation: the deadlines that apply to you, the forms your county uses, and the resolution paths people in your position actually take. Free for 3 days — no card required.
This page is legal information, not legal advice. Code text is sourced from official publications and may lag amendments — always confirm at the official source linked above. Plain-English summaries and relationship data are AI-derived and reviewed on an ongoing basis; verify with a licensed attorney before acting.